Tips for Purchasing an Operating Table

<!-- @page { margin: 0.79in } P { margin-bottom:operated remote control, arm boards, shoulder
0.08in } -->braces, stirrups, leg holders, counter supports, and a
1. The main factor to consider when selecting anradiolucent tabletop.
operating or orthopedic table is that it meets the5. The operating beds should be C-arm accessible,
positioning needs of the procedures for which it isand accept 35 × 43 cm x-ray cassettes.
intended.6. There are several accessories used to position and
2. Facilities may wish to consider some additionalstabilize the patient, such as arm boards, shoulder
factors when selecting a table: reliability of the table,braces, stirrups, leg holders, and counter supports.
replacement pad availability, durability of casterThese can usually be obtained from operating table
locking mechanisms, low maintenance, ease ofmanufacturers.
cleaning and disinfecting the table and its accessories,7. For both remanufactured and new tables, cleaning
protection of mechanisms from corrosive fluids,the hydraulics is important. Users should follow
sufficient power cord length, and service record ofmanufacturers' guidelines in this matter. To remove
the manufacturer.debris, oil, and water, manufacturers suggest
3. Minimal positioning for operating tables andperiodically replacing the filters.
orthopedic tables: from the horizontal plane 25° in8. Lately, operating tables that are compatible with
the Trendelenburg position, 25° in the reverseaccessories from several manufacturers have been
Trendelenburg position, and 18° in the lateral tiltdeveloped. If you are planning on using certain
position.accessories for your table make sure that the
4. Other important requirements for tables include: aaccessory is compatible.
side rail, a load limit of at least 159 kg, a hand or foot